Interface Settings; Setting Baud Rate; Setting Character Bit Length; Interface Settings 2-1. Setting Baud Rate - Sekonic SR-3500 Operating Manual

Connecting to a computer
2.

Interface settings

2-1.

Setting baud rate

(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
(4) Use the
(5) Press the
(The fl ashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
Note) To continue interface setting
Instead of returning to normal mode in step (6), you can continue
setting various values by skipping steps (1) and (2).
2-2
.

Setting character bit length

(1) Press the
(2) Use the
and press the
-34-
RS-232C
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
UP
and switches to select [Baud Rate] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
Baud rate
setting values
• 9600 • 19200
• 38400 • 57600
• 115200