Sekonic SR-3500 Operating Manual page 24

Operation
Preparation
(when stacker unit installed)
1.
Install the main tray on the main body unit. Hook the tabs on the end of the main
tray into the slots on the main device's paper discharge side.
2.
Install the selection tray on the main body unit. Hook the tabs on the end of the
selection tray into the slots on the main device's paper discharge side.
3.
Connect the power cord to the main device.
When using the printer, operate P75 " Stacker unit (printer) preparation "
Main tray
Selection tray
Operation Preparation
-23-