Sr-9000 Mode; Character Size Setting; Sr-600 Sr-9000 Mode 1. Character Size Setting - Sekonic SR-3500 Operating Manual

SR-600,SR-9000 mode
1.

Character size setting

The width of a character can be set in fi ve increments.
No.
1
2
3
4
5
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
(4) Use the
(5) Press the
(The fl ashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
Printer settings
Size (a)
3.2mm
4.0mm
4.8mm
5.6mm
6.4mm
MENU
switch to enter the menu mode.
DOWN
UP
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Size] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
SR-600,SR-9000 mode
About 3mm
a
Character size
setting values
• 3.2mm • 4.0mm
• 4.8mm • 5.6mm
• 6.4mm
-57-