Sekonic SR-3500 Operating Manual page 41

Data reading settings Setting reading method
Setting magnifi cation when timing control types are selected
1.
MENU
Press the
2.
UP
Use the and
and press the
3.
UP
Use the and
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
4.
UP
Use the and
5.
FEED/ENTER
Press the
(The fl ashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
-40-
switch to enter the menu mode.
DOWN
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
switches to select [Magnifi cation] setting,
FEED/ENTER
switch.
DOWN
switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Magnifi cation setting values
• Top-end timing
control type
1 - 9 (times)
• Bottom-end timing
control type
2 - 9 (times)