Sekonic SR-3500 Operating Manual page 57

Printer settings SR-3500,SR-6500 mode
(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
(4) Use the
(5) Press the
(The fl ashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
[Setting example 1]
When the size is set at 3.2mm and the interval is 0.8mm.
[Setting example 2]
When the size is set at 6.4mm and the interval is 5.6mm.
-56-
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
MENU DOWN
and switches to select [Character Pitch] setting,
FEED/ENTER
switch.
MENU DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
Character pitch
setting values
0.8 - 92.0 (mm)
0.1mm increments
3.2mm 3.2mm
0.8mm
6.4mm 6.4mm
5.6mm