3.
Character interval setting
The space between printed characters can be increased between 0 to 99
pixels. The actual character interval (in mm units) is determined by the "size,"
"magnifi cation," and "interval" settings.
Character interval (b) = character interval increment x (magnifi cation + interval + 1)
No.
Size
1
3.2mm
2
4.0mm
3
4.8mm
4
5.6mm
5
6.4mm
MENU
(1)
Press the
UP
(2)
Use the
and press the
UP
(3)
Use the
and press the
(" " mark fl ashes in the fi rst column of the fi rst line on the LCD.)
UP
(4)
Use the
FEED/ENTER
(5)
Press the
(The fl ashing " " mark disappears from the LCD.)
(6)
Keep pressing the
or press the
Printer settings
character interval increment
0.4mm
0.5mm
0.6mm
0.7mm
0.8mm
switch to enter the menu mode.
DOWN
and
switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and
switches to select [Character Pitch] setting,
FEED/ENTER
switch.
DOWN
and
switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
MENU
switch to return to normal mode.
SR-600,SR-9000 mode
b
Character pitch
setting values
0 - 99 (Dots)
-59-