Interface Settings; Setting Baud Rate; Setting Character Bit Length - Sekonic SR-2300 Manual

2.

Interface settings

2-1.

Setting baud rate

(1) Press the
(2) Use the
and press the
(3) Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
(4) Use the
(5) Press the
(The flashing " " mark disappears from the LCD.)
(6) Keep pressing the
or press the
Note) To continue interface setting
Instead of returning to normal mode in step (6), you can continue
setting various values by skipping steps (1) and (2).
2-2.

Setting character bit length

(1) Press the
(2) Use the
and press the
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
UP DOWN
and switches to select [Baud Rate] setting,
FEED/ENTER
switch.
UP DOWN
and switches to set the value.
FEED/ENTER
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
MENU
switch to enter the menu mode.
UP DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
Connecting to a computer
Baud rate
setting values
• 9600
• 38400
• 115200
B
RS-232C
• 19200
• 57600
-23-