B Setting Hopper Mode - Sekonic SR-2300 Manual

B
Setting hopper mode
Setting the hopper mode for reading sheets.
The hopper mode can be set to either "ADF" or "manual feed."
If you set it to "manual feed," you need to set the sheet insertion waiting time.
1.
MENU
Press the
2.
UP
Use the
and press the
3.
UP
Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
4.
UP
Use the
5.
FEED/ENTER
Press the
(The flashing " " mark disappears from the LCD.)
6.
Keep pressing the
or press the
Set sheet insertion waiting time when "manual feed" is selected
1.
MENU
Press the
2.
UP
Use the
and press the
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select [Hopper Mode] setting,
FEED/ENTER
switch.
DOWN
and switches to set the value.
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
B
Data reading settings Setting hopper mode
hopper mode
setting values
• ADF
• Manual Feed
-33-