Interface Settings - Sekonic SR-2300 Manual

2.

Interface settings

MENU
(1) Press the
UP
(2) Use the
and press the
UP
(3) Use the
and press the
(" " mark flashes in the first column of the first line on the LCD.)
Set any number using the
FEED/ENTER
(4) Press the
(The flashing " " mark disappears from the LCD.)
(5) Keep pressing the
or press the
switch to enter the menu mode.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch.
DOWN
and switches to select the following parameters,
FEED/ENTER
switch to begin [Device ID] setting.
UP DOWN
and
switch to save the setting value into memory.
CLEAR/EXIT
switch until it returns to normal mode,
C
MENU
switch to return to normal mode.
Connecting to a computer
switches.
Device ID
setting value
0-126
B
USB
-21-