Table of Contents
Advertisement
(Optional) Mounting and Connecting the External Antenna
Step 2: Attach the Dynamic Bracket to the Access Point
Figure 37.
4. Apply weatherproofing tape to the antenna connector to help prevent water from
entering the connector.
5. Reconnect the Access Point to the power source.
CAUTION:
interface on the Access Point, make sure that the metal cap remains installed and securely
fastened to protect the interface from elements, such as water or dirt.
You have completed connecting the external antenna to the Access Point.
52
Connect the standard N-type male connector to the standard N-type
female connector on the Access Point
If you are not connecting an external antenna to the standard N-type antenna
Advertisement
Table of Contents
Need help?
Do you have a question about the ZoneFlex 2741 802.11g and is the answer not in the manual?