Ruckus Wireless ZoneFlex 2741 802.11g Getting Started Manual page 45

1. Place the static bracket at the exact location on the mounting surface where you want
to mount it.
2. Use the static bracket as a template to mark the locations of the mounting holes on
the four mounting tabs.
Figure 26. Mark the locations of the mounting holes
o
3. Remove the static bracket from the mounting surface.
4. Drill an 8mm-diameter hole with a depth of 36mm-38mm into each of the four markings
that you made on the mounting surface.
5. Insert a wall anchor (with the unthreaded part first) into each of the holes that you
drilled.
6. Place a metal cone on each wall anchor, and then place a flat washer on top of the
metal cone.
Attaching the Mounting Brackets
Step 1: Attach the Static Bracket to the Mounting Surface
41