Ruckus Wireless ZoneFlex 2741 802.11g Getting Started Manual page 49

2. Use the clamp to attach the bracket to the pole.
Figure 31. Use the clamp to attach the bracket to the pole
3. Using a 10mm flathead screwdriver, tighten the clamp lock to secure the bracket to the
pole. Screw torque value must be 4kg-5kg.
Figure 32. Tighten the clamp lock to secure the bracket
4. Continue to "Step 2: Attach the Dynamic Bracket to the Access
Attaching the Mounting Brackets
Step 1: Attach the Static Bracket to the Mounting Surface
Point".
45