Ruckus Wireless ZoneFlex 2741 802.11g Getting Started Manual page 12

Before You Begin
Get to Know the Access Point Features
Table 2. LED states and behaviors
LED
PWR
If you want to extend the range of your wireless network, you can connect an external high
gain antenna to the standard N-type radio frequency (RF) antenna connector on the top
panel of the Access Point. The antenna must have a gain of less than 9dBi to comply with
FCC and CE regulations. For more information, refer to
Connecting the External Antenna"
Figure 4.
8
Meaning
• Green: The Access Point is connected to a power
source.
• Off: No power is available, or the Access Point is not
connected to a power source.
on
The antenna connector is protected by a metal cap
"(Optional) Mounting and
page 50.
Metal Cap