Step 5: Disconnect The Access Point From The Administrative Computer - Ruckus Wireless ZoneFlex 2741 802.11g Getting Started Manual

Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
5. Click Update Settings to save your changes.
You have completed setting the FlexMaster server address on the Access Point.
Figure 19. Type the FlexMaster server URL
NOTE: Instructions on how to verify that the Access Point and FlexMaster can communi-
cate with each other are provided in "Check the TR069 Status (FlexMaster Management
Only)" on page 32.
Step 5: Disconnect the Access Point from the
Administrative Computer
1. Disconnect the Access Point from the power source (either from the PoE injector or
DC power source).
2. Verify that the PWR LED on the back of the Access Point is off.
3. Disconnect the Ethernet cable from the administrative computer's Ethernet port.
29