Table of Contents
Advertisement
Mounting the Access Point
Step 2: Attach the Dynamic Bracket to the Access Point
Figure 35.
Insert hex bolts into the mounting holes
5. Finger tighten the hex bolts.
6. Adjust the Access Point to your desired orientation.
NOTE: If you have not yet determined the optimal orientation for your Access Point, refer
to
"Determine the Optimal Mounting Location and Orientation"
on
page 10
for orienta-
tion guidelines.
7. Using a 10mm ratchet wrench, tighten the hex bolts to fix the Access Point's orientation.
Screw torque value must be 4kg-5kg.
You have completed mounting the Access Point.
49
Advertisement
Table of Contents
Need help?
Do you have a question about the ZoneFlex 2741 802.11g and is the answer not in the manual?