Step 3: Log Into The Access Point's Web Interface; Step 4: Configure The Wireless Settings - Ruckus Wireless ZoneFlex 2741 802.11g Getting Started Manual

Step 3: Log Into the Access Point's Web Interface

1. On the administrative computer, open a Web browser window.
2. In the address or location bar, type the following address:
https://192.168.0.1
3. Press <Enter> on the keyboard to connect to the Access Point's Web interface. A
security alert message appears.
4. Click Yes or OK (depending on the browser) to continue. The Access Point's login page
appears.
Figure 16. The ZoneFlex Access Point login page
5. In User name, type super.
6. In Password, type sp-admin.
7. Click Log In. The Web interface appears, displaying the Device page.
8. Continue to

"Step 4: Configure the Wireless Settings"

Step 4: Configure the Wireless Settings
To complete this step, you will need to configure the settings on the Common tab and at
least one Wireless # tab. These are the essential wireless settings that will enable wireless
devices on the network to associate with the Access Point.
For your reference, the default wireless settings on the Access Point are listed in
Configuring for Standalone Operation or for Management by FlexMaster
Configuring the Access Point
below.
Table 4.
25