Led Colors And What They Mean - Ruckus Wireless ZoneFlex 2741 802.11g Getting Started Manual

Before You Begin
Get to Know the Access Point Features
Table 1. LEDs and bottom panel connectors
No Label
1 LEDs
2 RJ45
3 Reset
4 12V DC

LED Colors and What They Mean

Refer to Table 2
Table 2. LED states and behaviors
LED
OPT
DIR
6
Description
See "LED Colors and What They Mean"
information.
LAN port that supports Power over Ethernet (PoE) and 10/
100Mbps network connections
Using a pointed object (for example, a pen), press this
button to restart the Access Point or to restore it to factory
default settings:
• To restart the Access Point, press the Reset button once.
• To restore the Access Point to factory default, press the
Reset button for six (6) seconds.
WARNING: Restoring the Access Point to factory default
settings removes all configuration changes that you have
made. These include the IP address, password, access
control list, and wireless settings. Returning the
configuration of these features to their factory default
settings may result in network connectivity issues.
In addition to PoE, you can also use direct current or DC
(from a battery, for example) to supply power to the Access
Point.
below for all possible LED states and what they indicate.
Meaning
Not used in this model
• Off: The Access Point is not being managed by
ZoneDirector (standalone mode).
• Green: The Access Point is being managed by
ZoneDirector.
• Flashing green: The Access Point is being managed
by ZoneDirector, but is currently unable to
communicate with ZoneDirector.
below for more