Ruckus Wireless ZoneFlex 2741 802.11g Getting Started Manual page 30

Configuring the Access Point
Configuring for Standalone Operation or for Management by FlexMaster
Table 4. Default wireless settings
Setting
SSID (network name)
Encryption (security)
Default management IP address
Configure Common Wireless Settings
1. On the left menu of the Web interface, click Configuration > Wireless. The Common
page appears.
2. Verify that the common wireless settings are configured as listed in
Table 5. Common wireless configuration
Setting
Wireless Mode
Channel
Country Code
3. If you made any changes to the Common tab, click Update Settings.
4. Continue to
26
Recommended Value
Auto-select
SmartSelect
• If you purchased the Access Point in the United
States, this value is fixed to United States at the
factory and is not user configurable.
• If you purchased the Access Point outside the
United States, verify that the value is set to your
country or region. Selecting the correct country
code ensures that the Access Point uses only the
radio channels allowed in your country or region.
"Configure Wireless # Settings"
Default Value
Wireless 1 to Wireless 8 (8 WLANs)
Disabled on all WLANs
192.168.0.1
below.
Table 5.