Power Led; Rps Status Led; Port Mode Led - HP FlexNetwork 5120 SI Series Installation Manual

LED

RPS status LED

Port mode LED

10/100/1000Base-T Ethernet port LED
1000Base-X SFP port LED

Power LED

The power LED shows the operation status of the switch.
Table 11 Power LED description
LED mark
Power
RPS status LED
The 5120 24G PoE+ (370W) SI switch has one RPS status LED on its front panel to show the
operating status of the RPS DC input.
Table 12 RPS status LED description
LED mark
RPS
Port mode LED
The 5120 8G PoE+ (65W) SI, 5120 8G PoE+ (180W) SI, and 5120 24G PoE+ (370W) SI switches
have a port mode LED to indicate the type of information that the network port LEDs (excluding the
SFP port LEDs) are showing. You can use the port LED mode switching button to change the type of
displayed port information.
Table 13 Port mode LED description
LED mark
Mode
Status
Steady green
Flashing green (1 Hz)
Flashing green (3 Hz)
Off
Status
Steady green
Off
Status
Steady green
Flashing green (1 Hz)
Availability
5120 24G PoE+ (370W) SI
5120 8G PoE+ (65W) SI, 5120 8G PoE+ (180W) SI, 5120
24G PoE+ (370W) SI
Entire series
Entire series
Description
The switch is operating correctly.
The system is performing power-on self test (POST) or
downloading software.
POST has failed or another fatal error has been detected.
The switch has been powered off.
Description
The RPS DC input is normal.
The RPS unit is not connected or the RPS DC input is
abnormal.
Description
The network port LEDs are showing port rates.
The network port LEDs are showing the status of PoE power
supply on the ports.
36