Port Mode Led; Seven-Segment Led - HP 5500 EI Series Installation Manual

Table 14 RPS status LED description for the non-PoE switches
LED mark
RPS
Table 15 RPS status LED description for the PoE switches
LED mark
RPS

Port mode LED

The port mode LED indicates the type of information that the network port LEDs are showing. You can use
the port LED mode switching button to change the type of displayed port information.
Table 16 Port mode LED description
LED mark
Mode

Seven-segment LED

The seven-segment LED, together with the system status LED, shows detailed system operating information
(see Table 17).
The seven-segment LED can also show the total PoE output power as a percentage of the maximum PoE
output power that a PoE switch can supply (see
(2 slots), 5500-24G-PoE+ EI TAA (2 slots), 5500-24G-PoE+ SI (2 slots), 5500-48G-PoE+ EI (2 slots),
5500-48G-PoE+ EI TAA (2 slots), and 5500-48G-PoE+ SI (2 slots).
Table 17 Seven-segment LED description (I)
System status LED
(PWR/SYS) status
Flashing green
Status Description
Both the RPS DC input and the AC input are normal, or an RPS is
Steady green
connected and the AC input is normal.
The RPS DC input is normal, but the AC input is disconnected or
Steady yellow
has failed.
Off No RPS is connected.
Status Description
Steady green Both the RPS DC input and the AC input are normal.
The RPS power input is normal, but the AC input is disconnected or
Steady yellow
has failed.
Off The RPS power input is abnormal or no RPS is connected.
Status
Steady green
Flashing green (1 Hz)
(available only for the PoE+
switch models)
Steady yellow
Seven-segment LED (Unit) status
The LED displays numbers one by one.
Description
The network port LEDs are showing port rates.
The network port LEDs are showing the status of PoE
power supply on the ports.
The network port LEDs are showing duplex modes.
Table 18). The PoE switches include 5500-24G-PoE+ EI
Description
POST is running, and the LED displays the
ongoing test item ID.
57