14
14.5.4 03 Multi Folder (Fold) Adj. \ 02 Tri-Fold-in Pos. Adj.
Perform this adjustment for the folding positions in Tri-Fold-in mode
processed by the folding unit FD-501.
Reminder
When adjusting both Single Fold and Double Fold, be sure to start with
the Double Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line,
therefore a distance (b) in step 5 will be altered by changing the position
of either Single Fold or Double Fold.
To specify Tri-Fold-in Pos. Adj.
1
Touch [Adjustment] on the Machine Status screen.
The Adjustment Menu screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then
[02 Tri-Fold-in Pos. Adj.].
The Tri-Fold-in Position Adjustment screen will be displayed.
14-40
bizhub PRO C6500 / bizhub PRO C6500e
Machine adjustment