Configuring Product-Specific Configuration Parameters - Cisco 7931G Administration Manual

Configuring Product-Specific Configuration Parameters

Configuring Product-Specific Configuration Parameters

Cisco Unified Communications Manager Administration allows you to set some product specific
configuration parameters for Cisco Unified IP Phones.
path, and the parameters in Cisco Unified Communications Manager Administration.
Table 5-2
Configuration Window
Enterprise Phone
Configuration window
Common Phone Profile
window
Phone Configuration
window
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
5-16
Configuration Parameters for Cisco Unified IP Phones
Path
System > Enterprise Phone
Configuration
Device > Device Settings >
Common Phone Profile
Device > Phone; Product
Specific Configuration portion
of window
Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-2 lists the configuration windows, their
Parameters
You can set these parameters in any of
the three configuration windows:
Settings Access
•
Video Capabilities
•
Web Access
•
• Load Server
RTCP
•
• Peer Firmware Sharing
Cisco Discovery Protocol (CDP):
•
Switch Port
• Cisco Discovery Protocol (CDP):
PC Port
Link Layer Discovery Protocol -
•
Media Endpoint Discover
(LLDP-MED): Switch Port
Link Layer Discovery Protocol
•
(LLDP): PC Port
IPv6 Load Server
•
802.1x Authentication
•
When you set the parameters, select
the Override Common Settings
check box for each setting you want to
update. If you do not check this box,
the corresponding parameter setting
does not take effect. If you set the
parameters at the three configuration
windows, the setting takes precedence
in the following order:
Phone Configuration window
•
Common Phone Profile window
•
Enterprise Phone Configuration
•
window
OL-20798-01