Cisco 7931G Administration Manual page 112

Telephony Features Available for the Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Do Not Disturb When DND is turned on, either no audible rings occur
(DND) during the ringing-in state of a call, or no audible or visual
notifications of any type occur.
You can configure the phone to have a softkey template
with a DND softkey or a phone-button template with DND
as one of the selected features.
The following DND-related parameters are configurable
in Cisco Unified Communications Manager
Administration:
Do Not Disturb—This checkbox allows you to enable
•
DND on a per-phone basis. Choose Device > Phone
> Phone Configuration.
• DND Option—Choose "Call Reject" (to turn off all
audible and visual notifications), or "Ringer Off" (to
turn off only the ringer). DND Option appears on both
the Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
DND Incoming Call Alert—Choose the type of alert
•
to play, if any, on a phone for incoming calls when
DND is active. This parameter is located on both the
Common Phone Profile window and the Phone
Configuration window (Phone Configuration window
value takes precedence).
BLF Status Depicts DND—Enables DND status to
•
override busy/idle state.
Enbloc Dialing Enbloc dialing enables SCCP to send all digits of a phone
number simultaneously.
(SCCP phones
only) You must disable enbloc dialing if either Forced
Authorization Code (FAC) or Client Matter Code (CMC)
dialing is being used.
Fast Dial Allows a user to enter a Fast Dial code to place a call. Fast
Service Dial codes can be assigned to phone numbers or Personal
Address Book entries.
Forced Controls the types of calls that certain users can place.
authorization
Note
codes (FACs)
Group call Allows a user to answer a call that is ringing on a directory
pickup number in another group.
Help System Provides a comprehensive set of topics that appear on the
phone screen.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
5-8
If you are using this feature, you must disable
Enbloc dialing. See Enbloc Dialing
Chapter 5 Configuring Features, Templates, Services, and Users
Configuration Reference
Cisco Unified Communications Manager
Features and Services Guide,
To disable enbloc dialing, in Cisco Unified
Communications Manager Administration, go
to Device > Phone. On the Phone
Configuration window, in the "Product
Specific Configuration Layout" area, uncheck
the "Enbloc Dialing" box, then click Apply
Config, and then click Save.
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide,
for details.
Forced Authorization
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide,
Requires no configuration.
Do Not Disturb.
Client Matter Codes and
Codes.
Call Pickup.
OL-20798-01