Understanding Interactions With Other Cisco Unified Ip Communications Products; Manager - Cisco 7931G Administration Manual

For cisco unified communications manager 8.0 (sccp and sip)
Hide thumbs Also See for 7931G:
Table of Contents

Advertisement

Preparing to Install the Cisco Unified IP Phone on
Your Network
Cisco Unified IP Phones enable you to communicate using voice over a data network. To provide this
capability, the phones depend upon and interact with several other key Cisco IP Telephony and network
components, including Cisco Unified Communications Manager, Domain Name System (DNS) and
DHCP servers, TFTP servers, media resources, and Cisco prestandard PoE.
This chapter focuses on the interactions between the Cisco Unified IP Phone 7931G and Cisco Unified
Communications Manager, DNS and DHCP servers, TFTP servers, and switches. It also describes
options for powering phones.
For related information about voice and IP communications, refer to this URL (you must be a registered
Cisco.com user):
http://www.cisco.com/en/US/products/sw/voicesw/index.html
This chapter includes these topics:
Understanding Interactions with Other Cisco
Unified IP Communications Products
To function in the IP telephony network, the Cisco Unified IP Phone must be connected to a networking
device, such as a Cisco Catalyst switch. You must also register the Cisco Unified IP Phone with a
Cisco Unified Communications Manager system before sending and receiving calls.
This section includes these topics:
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Understanding How the Cisco Unified IP Phone Interacts with Cisco Unified Communications
Manager, page 2-2
Understanding How the Cisco Unified IP Phone Interacts with the VLAN, page 2-2
2
C H A P T E R
2-1

Advertisement

Table of Contents
loading

Table of Contents