Cisco 7931G Administration Manual page 69

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
Domain Name Name of the DNS domain in which the phone resides.
Note
Operational VLAN Auxiliary Virtual Local Area Network (VLAN) configured on a
ID Cisco Catalyst switch in which the phone is a member.
If the phone has not received an auxiliary VLAN, this option
indicates the Administrative VLAN.
If neither the auxiliary VLAN nor the Administrative VLAN are
configured, this option is blank.
Admin. VLAN ID Auxiliary VLAN in which the phone is a member.
Used only if the phone does not receive an auxiliary VLAN from the
switch; otherwise it is ignored.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
If the phone receives different domain names from the
DHCPv4 and DHCPv6 servers, the domain name from the
DHCPv6 will take precedence.
Network Configuration Menu
To Change
Unlock network
1.
configuration options.
Disable DHCP.
2.
If the IP Addressing mode is
configured for IPv4 only, set
the DHCP option to No.
If the IP Addressing mode is
configured for IPv6 only, set
the DHCPv6 option to No.
If the IP Addressing mode is
configured for both IPv4 and
IPv6, set both DHCP option
and DHCPv6 to No.
Scroll to the Domain Name
3.
option, press the Edit
softkey, and then enter a
new domain name.
Press the Validate softkey
4.
and then press the Save
softkey.
The phone obtains its
Operational VLAN ID via Cisco
Discovery Protocol (CDP) from
the switch to which the phone is
attached. To assign a VLAN ID
manually, use the Admin VLAN
ID option.
Unlock network
1.
configuration options.
Scroll to the Admin. VLAN
2.
ID option, press the Edit
softkey, and then enter a new
Admin VLAN setting.
Press the Validate softkey
3.
and then press the Save
softkey.
4-7