Cisco 7931G Administration Manual page 117

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Ring setting Identifies ring type used for a line when a phone has
another active call.
Ringer Volume The Ringer Volume Control feature enables the system
Control administrator to control the minimum ringer-volume
setting and adjust the minimum volume level for the
ringer. Individual users cannot make the changes to the
minimum ringer-volume setting.
When a user presses the minus (–) side of the Volume
button to reduce the ringer volume in an on-hook state, the
volume decreases only to the configured minimum
volume-level setting. When the minimum volume level is
reached, no status message appears.
After a system restart, the minimum ringer volume resets
to the minimum ringer-volume setting that is received
from the configuration file. If the system administrator
configured a new minimum volume level since the last
startup and the end user had previously set the minimum
ringer volume lower, the ringer volume will be set to the
minimum value from the configuration file, not to the
user's setting.
This feature does not apply to handset, speaker, and
headset volumes during calls.
Services Allows you to use the Cisco Unified IP Phone Services
Configuration menu in Cisco Unified Communications
Manager Administration to define and maintain the list of
phone services to which users can subscribe.
Services URL Allows users to access services from a programmable
button button rather than by using the Services menu on a phone.
Session Handoff Allows users to switch calls from a mobile phone to
Cisco Unified devices that share the same line.
Handsets on all the devices on the shared line
flash simultaneously.
After a user answers the call from one of the Cisco Unified
devices, the other Cisco Unified devices that share the
same line display a Remote in Use message. However, if
the call fails to switch from the mobile phone, the
mobile phone maydisplay a Cannot Move
Conversation message.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Telephony Features Available for the Phone
Configuration Reference
For more information, see:
Cisco Unified Communications Manager
•
Administration Guide,
Configuration.
• Creating Custom Phone Rings, page
To configure the parameter in the
Cisco Unified CM Administration application,
choose Device > Phone, select the appropriate
IP phones, and scroll to the Product Specific
Configuration Layout pane.
For more information, see:
• Cisco Unified Communications
Manager Administration Guide,
Unified IP Phone Configuration.
For more information, see:
• Cisco Unified Communications Manager
Administration Guide,
Phone Configuration.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Cisco Unified Mobility and
Cisco Unified Mobility Advantage and Cisco
Unified Mobile Communicator Integration
Directory Number
6-2.
Cisco
Cisco Unified IP
5-13