Cisco 7931G Administration Manual page 82

Device Configuration Menu
Table 4-8 SIP General Configuration Menu Options (continued)
Option
Phone Label
Enable VAD
Start Media Port
End Media Port
NAT Enabled
NAT Address
Call Statistics
Related Topics
•
•
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
4-20
Description
Displays the text that is displayed on the top
right status line of the LCD on the phone. This
text is for end-user display only and has no effect
on caller identification or messaging. This value
will always be set to null.
This value is set to No by default.
Displays the start Real-Time Transport Protocol
(RTP) range for media.
Displays the end Real-Time Transport Protocol
(RTP) range for media.
Displays if Network Address Translation (NAT)
is enabled. This value will always be set to false.
Displays the WAN IP address of the NAT or
firewall server. This value will always be set to
null.
This value is set to No by default.
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-17
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Display only—cannot configure.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Display only—cannot configure.
Display only—cannot configure.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
OL-20798-01