Cisco 7931G Administration Manual page 113

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Hold/Resume Allows the user to move a connected call between an
active state and a held state.
Hold Reversion Limits the amount of time that a call can be on hold before
reverting to the phone that put the call on hold and alerting
the user.
Reverting calls are distinguished from incoming calls by
a single ring (or beep, depending on the new call indicator
setting for the line). This notification repeats at intervals
if not resumed.
A call that triggers Hold Reversion also displays an
animated icon in the call bubble and a brief message on
the status line.
You can configure call focus priority to favor incoming or
reverting calls.
Hold Status Enables phones with a shared line to distinguish between
the local and remote lines that placed a call on hold.
Hunt Group Provides load sharing for calls to a main directory
Display number. A hunt group contains a series of directory
numbers that can answer the incoming calls.
When an incoming call is offered to a directory number
that is part of the hunt group, this feature displays the
main directory number in addition to the calling party.
Immediate Allows users to transfer incoming calls directly to the
Divert voice messaging system.
Immediate Allows users to transfer incoming calls directly to their voice
Divert— messaging system or to the voice messaging system of the
Enhanced original called party.
Intelligent Reroutes a direct call to a user's mobile phone to the
Session Control enterprise number (desk phone). For an incoming call to a
remote destination (mobile phone), only the remote
destination rings; the desk phone does not ring. When the
call is answered on the mobile phone, the desk phone
displays a Remote In Use message. During these calls, a
user can use the various features of the mobile phone.
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Telephony Features Available for the Phone
Configuration Reference
Requires no configuration, unless you want to
use music on hold. See Music on hold
table for information.
Also see Hold Reversion in this table for
related information.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, Hold Reversion.
No configuration is required.
For more information, see:
Cisco Unified Communications Manager
•
System Guide, Understanding Route
Plans.
• Cisco Unified Communications Manager
Administration Guide,
Configuration.
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide, Immediate
For more information, see the Cisco Unified
Communications Manager System Guide,
Cisco Unified IP Phones.
For more information, see the Cisco
Unified Communications Manager
Features and Services Guide,
Unified Mobility.
in this
CTI Route Point
Divert.
Cisco
5-9