Configuring The Cisco Unified Ip Phone To Use Http/Https Protocols; Device Information - Cisco 7931G Administration Manual

Configuring the Cisco Unified IP Phone to Use HTTP/HTTPS Protocols

Configuring the Cisco Unified IP Phone to Use
HTTP/HTTPS Protocols
The Cisco Unified IP Phone can be configured to use:
•
•
If your Cisco Unified IP Phone is configured to use HTTP or HTTPS protocols (the second case above),
use http://<IP_address> or https://<IP_address> for the phone's web access.

Device Information

The Device Information area on a phone's web page displays device settings and related information for
the phone.
To display the Device Information area, access the web page for the phone as described in
Web Page for a Phone, page
Table 8-1
Item
MAC Address
Host Name
Phone DN
App Load ID
Boot Load ID
Version
Hardware Revision
Serial Number
Model Number
Message Waiting
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
8-4
The HTTPS protocol only
The HTTP or HTTPS protocols
Table 8-1 describes these items.
8-2, and then click the Device Information hyperlink.
Device Information Area Items
Description
Media Access Control (MAC) address of the phone
Unique, fixed name that is automatically assigned to the phone based on its MAC
address
Directory number assigned to the phone
Identifier of the firmware running on the phone
Identifier of the factory-installed load running on the phone
Version of the firmware running on the phone
Revision value of the phone hardware
Serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on any line for this phone
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Accessing the
OL-20798-01