SnapSAN S1000 User Guide
3. Select either Trunking or LACP, and then select at least two LANs for link
aggregation. Click OK.
4. Enable Trunking or LACP on the ports which are connected to the target iSCSI ports
on the gigabit switch.
5. Create a RAID Group and a virtual disk.
6. Attach a LUN to the virtual disk.
7. Logon by Microsoft iSCSI initiator.
Dual Controllers
The SnapSAN S1000 supports dual controllers of the same type for redundancy. Controller 1
(CTR1) is the Master controller and Controller 2 (CTR2) is the Secondary controller.
10400310-003 01/2013
©2010-13 Overland Storage, Inc.
Dual Controllers
5-15