Overland Storage SnapSAN S1000 User Manual page 53

SnapSAN S1000 User Guide
Menu options for snapshots are accessed by clicking the menu button (▼). Active functions
can be selected while inactive functions appear grayed out and cannot be selected.
This table shows the available functions and their descriptions:
This table shows the available buttons (under the table) and their descriptions:
IMPORTANT: For complete details and procedures used with SnapShots on a SnapSAN S1000
including automatically scheduled snapshots, refer to
Take a Snapshot
1. Click the Take a Snapshot button below the table.
2. Select a Virtual Disk, enter a Snapshot Name, and click OK.
3. Click to the menu button (▼) next to the snapshot number and select Set Quota (size).
10400310-003 01/2013
Column Name Description
Exposure Tells if the snapshot was completed or not.
Write Lists the write status of the snapshot:
• Read-write – The snapshot can be read or written to.
• Read-only – The snapshot is read-only.
Cache Mode Displays the type of cache used:
• Read-write – The cache can be read or written to.
• Read-only – The cache is read-only.
LUN # Shows the number of LUN that is attached to the snapshot.
Time Created States the time when the snapshot was created.
Menu Item
Set Quota
Rollback
Delete
Attach LUN
Detach LUN
List LUNs
Menu Item
Set Snapshot Space
Scheduled Snapshots
Take a Snapshot
Cleanup Snapshots
©2010-13 Overland Storage, Inc.
Descriptions
Set the size of the snapshot.
Rollback the snapshot.
Delete all the snapshots.
Attach a LUN to the snapshot.
Detach the LUN from the snapshot.
List the attached LUNs.
Descriptions
Reserve RAID Group space for snapshots.
Schedule times for automatic snapshots.
Manually create a snapshot.
Remove/delete all existing snapshot
"Snapshots" on page
Volume Configuration
5-4.
4-26
