Volume Creation Example - Overland Storage SnapSAN S1000 User Manual

SnapSAN S1000 User Guide
2. At the dialog box, enter or select the options:
a. Select the Virtual Disk from the drop-down list.
b. Enter the Host name.
c. Select the Target number from the drop-down list.
d. Select the LUN number from the drop-down list.
e. Choose the Permission level.
f. Click OK.
Detach a LUN
Click the menu button (▼) of the LUN being detached and select Delete LUN. Click OK to
confirm.

Volume Creation Example

The following is an example on how to create volumes. This example will create two virtual
disks in one RAID Group with each virtual disk sharing the cache volume. The cache volume
is created after system boots up automatically. Then a global spare disk with be set up. Last,
all of them will be deleted.
Create the Virtual Disks and RAID Groups
1. Create a RAID Group:
a. Go to Volume Configuration > RAID Group.
b. Click Create.
10400310-003 01/2013
Each Host must have either an iSCSI node name for access control or a wildcard (
to allow access by every host.
©2010-13 Overland Storage, Inc.
Volume Configuration
)
*
4-28
