Overland Storage SnapSAN S1000 User Manual page 39

SnapSAN S1000 User Guide
3. Select CHAP from the drop-down list:
4. Click OK to change the Authentication Method (Auth) to CHAP:
5. Click the menu button (▼) again and select Users.
6. Select all the CHAP users which will be used.
It can be more than one, but it must be at least one for CHAP to work.
7. Click OK.
To delete the CHAP authentication, from the drop-down menu, select Authentication
Methods and change it to None.
Tip: After setting CHAP authentication, the host initiator should be set with the same CHAP
account. Otherwise, a user cannot login.
Change Portal
Use this iSCSI Node option to change the network ports available:
1. Click the menu button (▼) of the node and select Change Portal.
10400310-003 01/2013
©2010-13 Overland Storage, Inc.
iSCSI Configuration
4-12
