Ups - Overland Storage SnapSAN S1000 User Manual

SnapSAN S1000 User Guide

UPS

The UPS tab on the Enclosure Management screen can be used to set up a Uninterruptible
Power Supply (UPS).
Currently, the system only supports and communicates with Smart-UPS systems by APC
(American Power Conversion Corp.). Please review the details from their webbiest:
http://www.apc.com/.
First, connect the system and APC UPS via the included cable for communication. (The
SnapSAN S1000 cable plugs into the APC serial cable that comes with the UPS.) Then set up
the shutdown values (shutdown battery level %) for when the power goes out.
NOTE: UPS systems from other companies will work, but they cannot communicate with the
This table shows the available options and their descriptions.
10400310-003 01/2013
SnapSAN S1000.
Options Description
UPS Type Select UPS Type.
• Smart-UPS – APC UPS
• None – UPS from other vendors or no UPS.
Shutdown Battery When below the setting level, system will shutdown. Setting level
Level (%) to "
Shutdown Delay If power failure occurs, and system power can not recover, the
(Seconds) system will shutdown at the time specified. Setting delay to "
will disable the function.
Shutdown UPS If you select ON, when power is gone, the UPS will shutdown by
itself after the system successfully shuts down. When the power
comes back, the UPS will start working and notify the unit to start
up. Selecting OFF has no impact on the system.
UPS Status The status of UPS:
• Detecting...
• Running
• Unable to detect UPS
• Communication lost
• UPS reboot in progress
• UPS shutdown in progress
• The batteries in the UPS have failed. Please change them
immediately.
©2010-13 Overland Storage, Inc.
" will disable UPS.
0
Enclosure Management
"
0
4-34
