Create A Backup Virtual Disk On The Target - Overland Storage SnapSAN S1000 User Manual

SnapSAN S1000 User Guide
2. Click the menu button (▼) next to the Port 4 name, and select Enable Replication.
NOTE: The Port 4 on Controller 2 will also be set as the Replication port automatically at the
3. At the confirmation message, click OK.
The setting can be reverted by disabling the Replication using the drop-down menu.

Create A Backup Virtual Disk On The Target

Before creating the replication job on the Source subsystem, a virtual disk has to be created
on the Target subsystem and the Type set to Backup.
1. On the Target subsystem, go to Volume Configuration > Virtual Disks and click
Create.
10400310-003 01/2013
same time as Controller 1.
©2010-13 Overland Storage, Inc.
Configure Replication
8-4
