Overland Storage SnapSAN S1000 User Manual page 25

SnapSAN S1000 User Guide
To access the Front Panel Display options, press the Enter (
Down (▼) arrows to scroll through the functions:
• System Info – Displays the firmware version and amount of RAM.
• Alarm Mute – Mutes an alarm after an Error occurs.
• Reboot/Shutdown – Reboots or shutdowns the system.
• Quick Install – Provides steps to create a RAID Group.
• Volume Wizard – Provides steps to create a volume.
• View IP Setting – Displays current IP address, subnet mask, and gateway.
• Change IP Config – Sets IP address, subnet mask, and gateway. There are 2 options:
DHCP (Get IP address from DHCP server) or static IP.
• Enclosure Mgmt – Shows the enclosure data for disk drive temperatures, fan status,
and the power supply status.
• Reset to Default – Resets the SnapSAN S1000 to default settings.
The default resets include Administration password set to "admin," IP address type set
to "DHCP," the DHCP default IP address set to "192.168.10.50," subnet mask set to
"255.255.255.0," and gateway set to "192.168.10.254."
Warning or Error events displayed on the Front Panel Display are automatically filtered by
the Front Panel Display default filter. It can be changed in the Web Management Interface
under System Configuration > Log and Alert Settings.
10400310-003 01/2013
©2010-13 Overland Storage, Inc.
Management Interfaces
) button. Use the Up (▲) and
ENT
3-4
