SnapSAN S1000 User Guide
1. At the Replications tab on the Source array, click the menu button (▼) and choose
Schedule.
2. Select the specific time settings and click OK.
Configure Snapshot Space
The Replication uses snapshots to replicate the data without stopping the access of the
Source virtual disk. If snapshot space is not configured on the Source virtual disk in advance,
the subsystem will allocate snapshot space automatically when the replication job is created.
The default snapshot space allocated by the subsystem is two times the size of Source virtual
disk. If the free space of the RAID group which the Source virtual disk resides in is less than
double size of the Source virtual disk, the replication job will fail and an error message is
shown.
To prevent this problem, make sure the RAID group has enough free space for the snapshot
space. Otherwise, the user has to configure the snapshot space of the Source virtual disk
manually before the replication job is created.
10400310-003 01/2013
©2010-13 Overland Storage, Inc.
Configure Snapshot Space
8-10