Clean (Delete) Snapshots; Schedule Automatic Snapshots - Overland Storage SnapSAN S1000 User Manual

SnapSAN S1000 User Guide
3. Select the Snapshots tab to display all snapshots taken from the virtual disk.
4. Click to the menu button (▼) next to the snapshot number and select Set Quota.
5. Enter the snapshot Size.
The size must not exceed the available space. If size is zero, the exposed snapshot will
be read-only. Otherwise, the exposed snapshot can be read or written to and the size
will be the maximum capacity for those rights.
6. Click to the menu button (▼) next to the snapshot number and select Attach LUN.
7. Enter the information requested and click OK.
See
The snapshot is ready for access.

Clean (Delete) Snapshots

There are two methods to clean (delete) all snapshots:
• Under Volume Configuration > Virtual Disks, click the menu button (▼) next to the
virtual disk number and select Cleanup Snapshots.
• Under Volume Configuration > Snapshots, click the Cleanup button.
Cleanup Snapshots deletes all snapshots and releases the snapshot space.

Schedule Automatic Snapshots

The snapshots of the data can be taken automatically, such as hourly or daily.
IMPORTANT: The RAID Group must already have space reserved from its free space for storing
snapshots.
1. There are two methods to set an scheduled snapshot:
10400310-003 01/2013
"Attach a LUN" on page 4-27
©2010-13 Overland Storage, Inc.
for details.
Snapshots
5-6
