Overland Storage SnapSAN S1000 Quick Start Manual

SnapSAN
This document describes how to unpack and install a SnapSAN
S1000 array into a rack.
NOTE: If SnapDisk E1000 expansion arrays are being used, install
them first following the instructions in the quick start guide that
comes with them.
WARNING:
To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working with
the unit.
AVERTISSEMENT:
Pour réduire le risque de choc électrique
ou endommagement de l'équipement, retirez toujours les
cordons électriques en travaillant avec l'appareil.
CAUTION: While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage
to micro-circuitry or static-sensitive devices.
Step 1: Activate Your Warranty!
It is essential that you activate your warranty before starting.
Technical and warranty support are not available until that is
done:
1. Note the product serial numbers from the box labels or
on the products.
2. Go to the Overland Storage web site:
http://www.overlandstorage.com/
Select
3.
Service & Support > My Products.
4. At the Site Login, enter your e-mail address and
password, and click GO.
5. Click Register New Product.
6. Fill in the information and click Submit.
7. Register the Controller module:
a. Click the Manage Products button.
b. From the Product Selector drop-down list, select the
unit in which you are installing the controller.
c. Click Add a Component.
d. Enter the controller information.
e. Click Save & Exit.
8. Repeat
Step 7 to register the Battery Backup Module.
9. For a dual-controller system, repeat
Secondary controller and battery.
10.Repeat Step 7 to register all the drive assemblies.
Your warranty certificate will be emailed to you. Follow the
instructions in the email to complete the registration process.
10400515-001 Sep 2013
S1000 Storage Array
™
Steps 7–8 for the
©2010-13 Overland Storage, Inc.
Enter
Enter
5325301507-SnapSAN S1000, s/n: 0247
Page 1 of 8
