Overland Storage SnapSAN S1000 User Manual page 58

SnapSAN S1000 User Guide
f. Select the second virtual disk.
g. Click Attach LUN.
h. Enter or select the following options:
i. Click OK.
5. Set a global spare disk:
a. Select the Physical Disk tab.
b. Click the menu button (▼) next to the free Physical Disks slot number and select
Delete Virtual Disks and RAID Groups
1. Detach the LUNs from the virtual disks:
a. Select the Logical Unit tab.
b. Click the menu button (▼) next to the first Host name and select Detach LUN.
c. At the confirmation message, click OK.
d. Repeat
2. Delete the virtual disks:
a. Select the Virtual Disks tab.
b. Click the menu button (▼) next to the first virtual disk and select Delete.
c. At the confirmation message, click OK.
d. Repeat
Tip: When deleting the virtual disks directly, the attached LUNs are detached at the same
3. Delete the RAID Group:
a. Select the RAID Group tab.
b. Verify that all virtual disks for this RAID Group are deleted.
c. Click the menu button (▼) next to the RAID Group Name and select Delete.
10400310-003 01/2013
• Host name of Target 1.
• Target number 1.
• LUN number LUN 1.
• Read-write permissions.
VD-R5-1 is now attached to LUN 0 and VD-R5-2 is attached to LUN 1.
Tip: The matching rules of access control are from the LUNs' created time, the earlier
created LUN is prior to the matching rules.
Set Global Space.
Steps a–c for the second LUN.
Steps a–c for the second virtual disk.
time.
Otherwise, the RAID Group cannot be deleted.
©2010-13 Overland Storage, Inc.
Volume Configuration
4-31
