SnapSAN S1000 User Guide
Network Settings
The Network Settings tab on the System Configuration screen allows you to view the MAC
address and change basic network settings:
• IP Address – change the address used for remote access by an administrator. There are
three address options: DHCP (default), BOOTP, and Specify a Static IP Address.
• DNS Server Address – If necessary, the IP address of the DNS server can be entered or
changed here.
• Service Ports – If the default HTTP, HTTPS, and SSH port numbers are not allowed on
your network, they can be changed here.
Login Settings
The Login Setting tab on the System Configuration screen is used to control access to the
SnapSAN S1000. Use it to set an auto logout time, to limit access to just one administrator
at a time, and to change the Admin and User passwords.
10400310-003 01/2013
©2010-13 Overland Storage, Inc.
System Configuration
4-4