Overland Storage SnapSAN S1000 User Manual page 57

SnapSAN S1000 User Guide
c. At the Create a Virtual Disk dialog, enter or select the options.
3. Repeat
RAID Group.
You now have virtual disks named VD-R5-1 and VD-R5-2. There are no LUNs
attached.
4. Attach a LUN to a virtual disk.
There are two methods to attach a LUN to a virtual disk:
• From Volume Configuration > Virtual Disks, click the menu button (▼) next to the
• From Volume Configuration > Logical Unit, click Attach LUN.
We will use both procedures:
a. Select the Virtual Disks tab.
b. Click to the menu button (▼) next to the virtual disk Name and select Attach
c. At the Attach LUN dialog, enter or select the options.
d. Click OK.
e. Select the Logical Unit tab.
10400310-003 01/2013
Step 2 to create another virtual disk named "VD-R5-2" using about 40% of the
virtual disk number and select Attach LUN.
LUN.
©2010-13 Overland Storage, Inc.
Volume Configuration
4-30
