Overland Storage SnapSAN S1000 User Manual page 36

SnapSAN S1000 User Guide
iSCSI IP Address Settings
To change an iSCSI IP address, click the menu button (▼) for the LAN port and select iSCSI
IP Address Settings. There are two options: DHCP or Static. You can select DHCP to acquire
an IP address automatically or Static to set the IP address manually:
Default Gateway
The default gateway can be changed by clicking the menu button (▼) for the LAN port that
you want as the gateway and selecting Make Default Gateway. There can be only one
default gateway.
To remove the default gateway, click the menu button (▼) of the LAN that is currently the
gateway, and select Remove Default Gateway.
Jumbo Frames (MTU)
The MTU (Maximum Transmission Unit) size can be enabled by clicking the menu button
(▼) of a LAN port and then clicking Enable Jumbo Frames. Maximum jumbo frame size is
9000 bytes.
CAUTION:
enabled. Otherwise, the LAN connection will not work properly.
To disable jumbo frames, click the menu button (▼) of the LAN that uses jumbo frames, and
select Disable Jumbo Frames.
10400310-003 01/2013
Jumbo frames for both the switching hub and HBA on the host computer must be
©2010-13 Overland Storage, Inc.
iSCSI Configuration
4-9
