Overland Storage SnapSAN S1000 User Manual page 33

SnapSAN S1000 User Guide
• SNMP Trap Settings – The SnapSAN S1000 allows up to three SNMP trap
addresses. The default community setting is public. You can choose the SNMP alert
levels you want to receive. The default setting is for only Warning and Error alerts.
There are many SNMP tools available on the web including:
• SNMPc:
• Net-SNMP:
• Windows Messenger – You must enable the Messenger service in Windows (Start >
Control Panel > Administrative Tools > Services > Messenger) for alerts to be
received. The SnapSAN S1000 allows up to three Messenger addresses. You can choose
the messenger alert levels you want to receive. The default setting is for only Warning
and Error alerts.
• Syslog Server Settings – The default port of syslog is 514. You can choose the system
alert levels you want to have logged. The default setting is for only Warning and Error
alerts.
There are syslog server tools available on the web for Windows including:
• WinSyslog:
• Kiwi Syslog Daemon:
Most UNIX systems build in syslog daemon.
• Admin Interface and Front Panel Display Alerts – You can choose the alert levels
you want to have pop up in the Web Management Interface and shown on the Front
Panel Display. The default setting for the Web Management Interface is no alerts
while the default setting for the Front Panel Display is for only Warning and Error
alerts.
• Device Buzzer – Check the box to disable the buzzer. Uncheck it to reactivate the
buzzer.
10400310-003 01/2013
http://www.snmpc.com/
http://net-snmp.sourceforge.net/
http://www.winsyslog.com/
http://www.kiwisyslog.com/
©2010-13 Overland Storage, Inc.
System Configuration
4-6
