Rack Mounting; Figure 4.1 P334T-Ml Rack Mounting - Avaya P334T-ML User Manual

Rack Mounting

The P334T-ML case fits in most standard 19-inch racks. P334T-ML is 2U
(88 mm, 3.5") high.
Place the P334T-ML in the rack as follows:
1 Snap open the ends of the front panel to reveal the fixing holes.
2 Insert the unit into the rack. Ensure that the four P334T-ML screw holes are
aligned with the rack hole positions as shown in Figure 4.1.
Figure 4.1
3 Secure the unit in the rack using the screws. Use two screws on each side. Do
not overtighten the screws.
4 Snap close the hinged ends of the front panel.
5 Ensure that ventilation holes are not obstructed.
P334T-ML User's Guide
P334T-ML Rack Mounting
Chapter 4 Installation and Setup
31