Displaying Raw Packet Data; Deleting A Beacon Station From The List - Yaesu FTM-300DR Instruction Manual

Displaying RAW packet data

Display the packet data (raw data) of the partner station from the APRS STATION LIST
detail screen.
1
Press the [F(SETUP)] key → [APRS FUNCTION] → [STN LIST].
The APRS STATION LIST screen will be displayed.
2
Rotate the DIAL knob to select the beacon, then press the DIAL knob.
A detail screen of the APRS STATION LIST will appear in the display.
3
Press the [F(SETUP)] key.
4
Rotate the DIAL knob to select the [RAW], then press the
DIAL knob.
The RAW packet data will appear in the display.
Rotate the DIAL knob to scroll the screen display.
5
Press the [BACK] key to return to the detail screen.
①Destination information: View the destination address information of AX.25
②Digipeater information: View the relay station (digipeater) information
③RAW TEXT:
Tips
• For transmit messages, information on DIGI (First) and DIG (Last) will not be displayed ("-" will be
displayed) as the digipeater information is not saved.
• When a 3rd Party Header Beacon (beacon from I-Gate and others) is received, the route information
included in the text of the 3rd Party Header Beacon will be displayed instead of the information
obtained from the AX.25 packet signal.

Deleting a beacon station from the list

A beacon station which is no longer required can be deleted from the list by selecting it on
the APRS STATION LIST screen.
1
Press the [F(SETUP)] key → [APRS FUNCTION] → [STN LIST].
The APRS STATION LIST screen will be displayed.
2
Rotate the DIAL knob to select the beacon.
3
Press the [F(SETUP)] key.
4
Rotate the DIAL knob to select [DEL], then press the DIAL knob.
A confirmation message "DELETE?" will appear in the display.
5
Rotate the DIAL knob to select [OK], then press the DIAL knob.
The callsign will be deleted from the list.
Details of RAW packet data display screen
①
②
③
View the text of raw data
22