4. TRIAL RUN AND ADJUSTMENT
4.3 Operating System Installation Procedure
Open the cover at the front of the
CPU and turn ON the install switch.
Turn ON the CPU power supply.
Install according to software package
instructions.
Turn OFF the CPU power supply.
Turn OFF the install switch and open
the cover at the front of the CPU.
In the CPU module, the operating system (hereafter abbreviated to the OS) can be
changed using the peripheral device and software package.
This OS change is called installation.
Start installation
End
POINTS
After completion of installation, always turn OFF the installation switch.
Refer to Section 1.5.1(4) for
the information on the install switch.
The RUN/STOP key switch is ignored.
Refer to Section 2.4.2 and 2.4.3
for the module mounting procedure.
Refer to the operating manual for the
software package used at the peripheral
device.
4 − 7