Layout Design Within Enclosure; Location Environment - Mitsubishi Electric A173UHCPU User Manual

2. DESIGN

2.4 Layout Design within Enclosure

2.4.1 Location Environment

The storage conditions are listed in the table below.
Environment
Ambient temperature
Ambient humidity
Atmosphere
Avoid locating the motion controller system in environments subject to:
(1) Ambient temperature outside the range 0°C to 55°C
(2) Ambient humidity outside the range 10% to 90% RH
(3) Condensation resulting from sudden temperature changes
(4) Corrosive or inflammable gas
(5) Large amounts of conducting dust or iron filings, oil mist, salt, organic solvents
(6) Direct sunlight
(7) Strong electrical or magnetic fields
(8) Direct vibrations or shocks on the unit.
No condensation resulting from sudden temperature changes
No corrosive or inflammable gas
Low levels of conducting dust or iron filings, oil mist, salt, organic solvents
Not subject to direct sunlight
No strong electrical or magnetic fields
No direct vibrations or shocks on the equipment.
CAUTION
Conditions
C C
0 to 55
10% to 90% RH
2 − 17