Configuring Ptz Connection Settings - Honeywell HRHM1041 User Manual

38 | Performance Series HQA Digital Video Recorder User Guide

Configuring PTZ Connection Settings

Before you can control a PTZ camera with the DVR, you must configure the PTZ connection
settings.
To configure the PTZ connection settings
1.
2.
3.
4.
www.honeywell.com/security
Go to Main Menu > Setting > System.
In the left navigation pane, click Pan/Tilt/Zoom.
Configure the following settings:
• Channel Select the channel (camera) that you want to configure PTZ settings for.
• Control Mode Select Serial.
• Protocol Select the camera's PTZ control protocol from the list.
• Address Enter the camera's address (ID).
• Baudrate Select a value between 1200 and 115200. The default setting is 9600.
• Data Bits Select a value between 5 and 8. The default setting is 8.
• Stop Bits Select 1, 1.5, or 2. The default setting is 1.
• Check Select None, Odd, Even, Mark, or Space.
Click Apply, and then click Save to save your settings and exit.