Input Slot; Duplex Printing - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

Print is performed with the size of document to be printed unchanged.

Nearest Size and Scale

If the paper size is smaller than the selected paper size, the driver reduces the print size.

If the paper size is larger than the size of document to be printed, print is not to fit the paper size.

Nearest Size and Crop

When the paper size is smaller than the size of document to be printed, print is adjusted to meet the

Input Slot

Use this to select the paper sources.

The following table shows the tabs or menus where you can select this function.

• For details about the paper sources, see "Paper and Other Media", Hardware Guide.

Use this function to select duplex printing.

The following table shows the tabs or menus where you can select this function.

[Fit to Paper] on [Printer Specific Options] in the

print dialog box.

[Fit to Paper] on the [Features x] tab on [Printer

Features] in the print dialog box.

[Paper Source:] on [General] in the print dialog

[Paper Feed] in the print dialog box.

[Print on Both Sides] on [Layout] in the print dialog

• 10.3 or higher

The [Two Sided Printing] check box on

[Layout] in the print dialog box.

Using PostScript 3

Table of Contents